1 ftr-k1 series n features l pin compatible with widely used vs and ftr-h1 series power relays l silent relay with patented unique u-shape spring. noise level 50db at 5cm. l low profle (height 18.8 mm) / cadmium free contacts l high insulation in small package insulation distance : 8 mm (between coil and contacts) dielectric strength : 5,000 vac surge strength :10,000 v l electric life of 100,000 operations at rated load (10a, 250vac, cos phi 1). tv-5 / tv-8 standard version. l low coil power (530mw) l ul (conforms to ul508, 873), csa (conforms to csa22.2 no.14), vde (conforms to vde 0435, 0631, 0700, 0860) l conforms to fimko, demko l sealed type relay, rt iii l complies with tv-5 / tv-8 inrush 78a (tv-5) / 120a (tv-8) l rohs compliant please see page 6 for more information actual marking does not carry the type name : "ftr" e.g.: ordering code: FTR-H3AA012V actual marking: h3aa012v silent power relay 1 pole - 78a/120a inrush current type ftr-h3 series n partnumber information ftr-h3 a a 012 v [example] (a) (b) (c) (d) (e) (a) relay type ftr-h3: ftr-h3 series (b) contact confguration a : 1 form a (spst-no) (c) coil type k : standard type (530mw) (d) coil rated voltage 012 : 5.....24vdc coil rating table at page 3 (e) contact material / tv type v : silver tin oxide + tv-5 rating t : silver tin oxide + tv-8 rating
2 ftr-k1 series ftr-h3 series n specification item ftr-h3 aa ( ) v ftr-h3 aa ( ) t contact data confguration 1 form a (spst-no) construction single material silver tin oxide ( movable : gold plated) resistance (initial) max. 100mohm at 6vdc, 1a contact rating 10a, 250vac / 30vdc max. carrying current *1 14a max. switching voltage 400vac / 300 vdc max. switching power 2,500va / 300w min. switching load *2 10ma, 5vdc max. inrush current 78a / 120vac 120a / 240vac life mechanical 20 x 10 6 operations minimum electrical ac resistive 100 x 10 3 operations minimum dc resistive 100 x 10 3 operations minimum lamp load tv-5 tv-8 coil data rated power 530mw operate power 260mw operating temperature range -40 c to +75 c (no frost) timing data operate max. 10ms (no diode, without bounce) release max. 5ms (no diode, without bounce) insulation resistance (initial) min. 1,000mohm at 500vdc dielectric strength open contacts 1,000vac (50/60hz) 1min contacts to coil 5,000vac (50/60hz) 1min surge strength coil to contacts 10,000v / 1.2 x 50s standard wave clearance 8mm creepage 8mm en61810-1, vde0435 voltage 250v pollution degree 2 material group iii a category b / 250v other vibration resistance misoperation>1us 10 to 55hz double amplitude 1.65mm endurance 10 to 55hz double amplitude 3.3mm shock misoperation>1us min. 100m/s2 (11 1ms) endurance min. 1,000m/s2 (6 1ms) weight approximately 12g average sound pressure approximately 50db at 5cm sealing sealed, rt iii * 1 when maximum carrying current is more than 10a, pcb layout needs to be considered. * 2 minimum switching loads mentioned above are reference values. please perform the confrmation test with actual load before production since reference values may vary according to switching frequencies, environmental contions and expected reliability levels.
3 ftr-k1 series n coil rating note: all values in the table are valid for 20c and zero contact current. * specifed operate values are valid for pulse wave voltage. type compliance contact rating ul ul 508 e63614 flammability: ul 94-v0 (plastics) 10a, 30 vdc/ 277 vac (resistive) 1/3 hp, 125vac 1/2 hp, 250vac tv-5, 120vac tv-8, 120vac/240vac (t type) pilot duty: b300, q300 (t type) csa c22.2 no. 14 lr 40304 vde 0435, 0860, 0700, 0631 40015008 10a, 250 vac (cos=1) 3a, 250 vac (cos=0.4) 10a, 30 vdc (0ms) 5/80a, 250 vac (v-type) 30k 8/120a, 250vac (t type) 30k n safety standards ftr-h3 series coil code rated coil voltage (vdc) coil resistance +/- 10% (ohm) must operate voltage (vdc) * must release - voltage (vdc) * max. coil voltage (vdc) rated power (mw) 005 5 47 3.5 0.5 8.2 530 009 9 155 6.3 0.9 9.9 012 12 270 8.4 1.2 19.8 024 24 1,100 16.8 2.2 39.6 complies with cqc
4 ftr-k1 series n characteristic data ftr-h3 series n reference data
5 ftr-k1 series n dimensions l dimensions ftr-h3 series l schematics (bottom view) l pc board mounting hole layout (bottom view) unit: mm
6 ftr-k1 series 1. general information l all signal and power relays produced by fujitsu components are compliant with rohs directive 2002/95ec including amendments. l cadmium as used in electrical contacts is exempted from the rohs directives on october 21st, 2005. (amendment to directive 2002/95/ec) l all of our signal and power relays are lead-free. please refer to lead-free status info for older date codes at: http://www.fujitsu.com/us/downloads/micro/fcai/relays/lead-free-letter.pdf l lead free solder plating on relay terminals is sn-3.0ag-0.5cu, unless otherwise specifed. this material has been verifed to be compatible with pbsn assembly process. 2. recommended lead free solder profle l recommended solder sn-3.0ag-0.5cu. rohs compliance and lead free information 3. moisture sensitivity l moisture sensitivity level standard is not applicable to electromechanical relays, unless otherwise indicated. 4. tin whiskers l dipped snagcu solder is known as presenting a low risk to tin whisker development. no considerable length whisker was found by our in house test. we highly recommend that you confrm your actual solder conditions flow solder condition: pre-heating: maximum 120?c soldering: dip within 5 sec. at 260?c solder bath solder by soldering iron: soldering iron temperature: maximum 360?c duration: maximum 3 sec. ftr-h3 series
7 ftr-k1 series japan fujitsu component limited gotanda-chuo building 3-5, higashigotanda 2-chome, shinagawa-ku tokyo 141, japan tel: (81-3) 5449-7010 fax: (81-3) 5449-2626 email: promothq@ft.ed.fujitsu.com web: www.fcl.fujitsu.com north and south america fujitsu components america, inc. 250 e. caribbean drive sunnyvale, ca 94089 u.s.a. tel: (1-408) 745-4900 fax: (1-408) 745-4970 email: components@us.fujitsu.com web: http://us.fujitsu.com/components europe fujitsu components europe b.v. diamantlaan 25 2132 wv hoofddorp netherlands tel: (31-23) 5560910 fax: (31-23) 5560950 email: info@fceu.fujitsu.com web: emea.fujitsu.com/components/ asia pacifc fujitsu components asia ltd. 102e pasir panjang road #01-01 citilink warehouse complex singapore 118529 tel: (65) 6375-8560 fax: (65) 6273-3021 email: fcal@fcal.fujitsu.com web: http://www.fujitsu.com/sg/services/micro/components/ fujitsu components international headquarter offces ?2010 fujitsu components europe b.v. all rights reserved. all trademarks or registered trademarks are the property of their respective owners. the contents, data and information in this datasheet are provided by fujitsu component ltd. as a service only to its user and only for gen - eral information purposes. the use of the contents, data and information provided in this datasheet is at the users own risk. fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehen - sive, complete and up to date. fujitsu components europe b.v. and affliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. nor do fujitsu components europe b.v. and affliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or ftness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. rev . july 21, 2010 ftr-h3 series
|
